E36 Big Brake Kit Front Lines
These brake lines work with both our Front Z06-M3 Brake Kit and the Front Porsche Brembo Big Brake Kit. They are a DOT approved, high quality piece. The lines have a rubber grommet installed which locates it to the strut housing and prevents chafing of the line.
They are an excellent alternative to the Stoptech BBK rear brake lines. Installation is made easier with the elimination of banjo fitting and copper crush washers. Simply screw the small male fitting into the caliper and connect the brake line.
Note: A single copper crush washer is used and included for the Z06 calipers. This crush washer is not required on the Porsche calipers since the fitting provided seats within the caliper as per the OEM brake line design.
Customer Reviews
Related Products
Quick View
{"id":6988301249,"title":"BMW E36 M3 Front BBK Adapter Brackets","handle":"bmwe36m3frontbbkadapterbrackets","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eCNC Machined Brackets are designed to fit a Porsche 996 Brembo front caliper to the E36 M3 front spindle. Two rotors options are available for this brake kit. The first option is the standard E46 M3 325x28mm front rotor. The standard E46 M3 rotor with fit with 17 inch wheels. Utilizing standard E46 M3 rotors requires 12mm to be machined from the mounting boss of the caliper. We offer this service for an additional charge.\u003cbr\u003eThe other rotor option is for 18 inch wheels only, but requires no modification to the calipers. The E46 M3 CSL 345mm floating rotor is a bolt on setup for this bracket an a 996 caliper.\u003c\/p\u003e\n\u003cp\u003eNote: You may use the standard rear rotors or two piece rear floating motorsport rotors (they are the same dimensions).\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBrackets are made from 7075-T6 Aluminum and MIL spec black anodized for corrosion resistance. The studs are made from 17-4 PH pre-hardened stainless steel. Calipers are secured to the bracket\/stud combo with supplied aircraft jet nuts and washers.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eCalipers used for this conversion are Front Calipers from the 1999-2004 Porsche 996 (non-turbo), the Boxster S or the Cayman S. All these calipers are made from the same Brembo casting.\u003c\/p\u003e\n\u003cp\u003eThe Porsche caliper part numbers for this conversion are:\u003cbr\u003e996.351.425 (driver side)\u003cbr\u003e996.351.426 (passenger side)\u003c\/p\u003e\n\u003cp\u003eCalipers will vary in color between Porsche model and options, but the castings will be the same as will the piston sizes. A pair of calipers can regularly be found between $350 and $450. If you are having trouble finding calipers for that price, please contact us. We may just have a pair of calipers to sell within that price range.\u003cbr\u003e*For off-road use only.\u003c\/p\u003e","published_at":"2016-07-16T22:07:00-04:00","created_at":"2016-07-16T22:07:01-04:00","vendor":"RallyRoad","type":"","tags":["E36 M3"],"price":22495,"price_min":22495,"price_max":27495,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32347566374986,"title":"No Thanks","option1":"No Thanks","option2":null,"option3":null,"sku":"B001","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"BMW E36 M3 Front BBK Adapter Brackets - No Thanks","public_title":"No Thanks","options":["No Thanks"],"price":22495,"weight":1588,"compare_at_price":null,"inventory_quantity":27,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32347566407754,"title":"Yes","option1":"Yes","option2":null,"option3":null,"sku":"B001-Machine12mm","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"BMW E36 M3 Front BBK Adapter Brackets - Yes","public_title":"Yes","options":["Yes"],"price":27495,"weight":8187,"compare_at_price":null,"inventory_quantity":20,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rallyroad.net\/cdn\/shop\/products\/B001-LTW_002_5ff8100f-5123-476b-81e3-9a48a05e63a7.jpg?v=1513625496","\/\/rallyroad.net\/cdn\/shop\/products\/B001-LTW_001_cd84e388-8bf0-48a8-93c2-0d782c3532ed.jpg?v=1513625496","\/\/rallyroad.net\/cdn\/shop\/products\/customer_photo02_6e0aae7d-0292-4686-9baf-183becf1b580.jpg?v=1513625496","\/\/rallyroad.net\/cdn\/shop\/products\/E46M3_FRONT_BRAKES07.jpg?v=1513625496","\/\/rallyroad.net\/cdn\/shop\/products\/E46M3_FRONT_BRAKES06.jpg?v=1513625496","\/\/rallyroad.net\/cdn\/shop\/products\/E46M3_FRONT_BRAKES01.jpg?v=1513625496","\/\/rallyroad.net\/cdn\/shop\/products\/E46M3_FRONT_BRAKES05.jpg?v=1513625496","\/\/rallyroad.net\/cdn\/shop\/products\/E46M3_FRONT_BRAKES02.jpg?v=1513625496","\/\/rallyroad.net\/cdn\/shop\/products\/B001_e35c0bf5-511f-49b3-bbff-2f3e673cf812.jpg?v=1513625496"],"featured_image":"\/\/rallyroad.net\/cdn\/shop\/products\/B001-LTW_002_5ff8100f-5123-476b-81e3-9a48a05e63a7.jpg?v=1513625496","options":["Caliper Machining Service"],"media":[{"alt":null,"id":161516388387,"position":1,"preview_image":{"aspect_ratio":1.333,"height":2020,"width":2693,"src":"\/\/rallyroad.net\/cdn\/shop\/products\/B001-LTW_002_5ff8100f-5123-476b-81e3-9a48a05e63a7.jpg?v=1513625496"},"aspect_ratio":1.333,"height":2020,"media_type":"image","src":"\/\/rallyroad.net\/cdn\/shop\/products\/B001-LTW_002_5ff8100f-5123-476b-81e3-9a48a05e63a7.jpg?v=1513625496","width":2693},{"alt":null,"id":161516421155,"position":2,"preview_image":{"aspect_ratio":1.332,"height":1526,"width":2033,"src":"\/\/rallyroad.net\/cdn\/shop\/products\/B001-LTW_001_cd84e388-8bf0-48a8-93c2-0d782c3532ed.jpg?v=1513625496"},"aspect_ratio":1.332,"height":1526,"media_type":"image","src":"\/\/rallyroad.net\/cdn\/shop\/products\/B001-LTW_001_cd84e388-8bf0-48a8-93c2-0d782c3532ed.jpg?v=1513625496","width":2033},{"alt":null,"id":161516453923,"position":3,"preview_image":{"aspect_ratio":1.323,"height":620,"width":820,"src":"\/\/rallyroad.net\/cdn\/shop\/products\/customer_photo02_6e0aae7d-0292-4686-9baf-183becf1b580.jpg?v=1513625496"},"aspect_ratio":1.323,"height":620,"media_type":"image","src":"\/\/rallyroad.net\/cdn\/shop\/products\/customer_photo02_6e0aae7d-0292-4686-9baf-183becf1b580.jpg?v=1513625496","width":820},{"alt":null,"id":161516486691,"position":4,"preview_image":{"aspect_ratio":1.25,"height":640,"width":800,"src":"\/\/rallyroad.net\/cdn\/shop\/products\/E46M3_FRONT_BRAKES07.jpg?v=1513625496"},"aspect_ratio":1.25,"height":640,"media_type":"image","src":"\/\/rallyroad.net\/cdn\/shop\/products\/E46M3_FRONT_BRAKES07.jpg?v=1513625496","width":800},{"alt":null,"id":161516519459,"position":5,"preview_image":{"aspect_ratio":1.248,"height":641,"width":800,"src":"\/\/rallyroad.net\/cdn\/shop\/products\/E46M3_FRONT_BRAKES06.jpg?v=1513625496"},"aspect_ratio":1.248,"height":641,"media_type":"image","src":"\/\/rallyroad.net\/cdn\/shop\/products\/E46M3_FRONT_BRAKES06.jpg?v=1513625496","width":800},{"alt":null,"id":161516552227,"position":6,"preview_image":{"aspect_ratio":1.252,"height":639,"width":800,"src":"\/\/rallyroad.net\/cdn\/shop\/products\/E46M3_FRONT_BRAKES01.jpg?v=1513625496"},"aspect_ratio":1.252,"height":639,"media_type":"image","src":"\/\/rallyroad.net\/cdn\/shop\/products\/E46M3_FRONT_BRAKES01.jpg?v=1513625496","width":800},{"alt":null,"id":161516584995,"position":7,"preview_image":{"aspect_ratio":1.25,"height":640,"width":800,"src":"\/\/rallyroad.net\/cdn\/shop\/products\/E46M3_FRONT_BRAKES05.jpg?v=1513625496"},"aspect_ratio":1.25,"height":640,"media_type":"image","src":"\/\/rallyroad.net\/cdn\/shop\/products\/E46M3_FRONT_BRAKES05.jpg?v=1513625496","width":800},{"alt":null,"id":161516617763,"position":8,"preview_image":{"aspect_ratio":1.25,"height":640,"width":800,"src":"\/\/rallyroad.net\/cdn\/shop\/products\/E46M3_FRONT_BRAKES02.jpg?v=1513625496"},"aspect_ratio":1.25,"height":640,"media_type":"image","src":"\/\/rallyroad.net\/cdn\/shop\/products\/E46M3_FRONT_BRAKES02.jpg?v=1513625496","width":800},{"alt":null,"id":161516650531,"position":9,"preview_image":{"aspect_ratio":1.499,"height":667,"width":1000,"src":"\/\/rallyroad.net\/cdn\/shop\/products\/B001_e35c0bf5-511f-49b3-bbff-2f3e673cf812.jpg?v=1513625496"},"aspect_ratio":1.499,"height":667,"media_type":"image","src":"\/\/rallyroad.net\/cdn\/shop\/products\/B001_e35c0bf5-511f-49b3-bbff-2f3e673cf812.jpg?v=1513625496","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eCNC Machined Brackets are designed to fit a Porsche 996 Brembo front caliper to the E36 M3 front spindle. Two rotors options are available for this brake kit. The first option is the standard E46 M3 325x28mm front rotor. The standard E46 M3 rotor with fit with 17 inch wheels. Utilizing standard E46 M3 rotors requires 12mm to be machined from the mounting boss of the caliper. We offer this service for an additional charge.\u003cbr\u003eThe other rotor option is for 18 inch wheels only, but requires no modification to the calipers. The E46 M3 CSL 345mm floating rotor is a bolt on setup for this bracket an a 996 caliper.\u003c\/p\u003e\n\u003cp\u003eNote: You may use the standard rear rotors or two piece rear floating motorsport rotors (they are the same dimensions).\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBrackets are made from 7075-T6 Aluminum and MIL spec black anodized for corrosion resistance. The studs are made from 17-4 PH pre-hardened stainless steel. Calipers are secured to the bracket\/stud combo with supplied aircraft jet nuts and washers.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eCalipers used for this conversion are Front Calipers from the 1999-2004 Porsche 996 (non-turbo), the Boxster S or the Cayman S. All these calipers are made from the same Brembo casting.\u003c\/p\u003e\n\u003cp\u003eThe Porsche caliper part numbers for this conversion are:\u003cbr\u003e996.351.425 (driver side)\u003cbr\u003e996.351.426 (passenger side)\u003c\/p\u003e\n\u003cp\u003eCalipers will vary in color between Porsche model and options, but the castings will be the same as will the piston sizes. A pair of calipers can regularly be found between $350 and $450. If you are having trouble finding calipers for that price, please contact us. We may just have a pair of calipers to sell within that price range.\u003cbr\u003e*For off-road use only.\u003c\/p\u003e"}
Quick View
{"id":6988301889,"title":"Caliper Machining Service","handle":"calipermachiningservice","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003ePlease Note: $50 Discount on Caliper Machining Service when purchased with Front Brake Brackets. Just select the machining option on the bracket product page.\u003cbr\u003e\u003cbr\u003eWe will machine your pair of calipers to work with our custom brackets.\u003cbr\u003e\u003cbr\u003eYou must ship us your brake calipers.\u003cbr\u003e\u003cbr\u003eNormal turn-around time for this service is around 5 working days. If you need them sooner, please let us know.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote: Price shown is for machining one pair of calipers\u003c\/strong\u003e.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePlease remove pads and pins or other hardware from the calipers. This will eliminate the chance of your pads and pins\/clips becoming lost if we have to take them apart for machining.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch5\u003eWhere to Send Your Calipers\u003c\/h5\u003e\n\u003cp\u003eRally Road \u003cbr\u003e54636 Pelican Lane\u003cbr\u003eShelby Township MI 48315\u003c\/p\u003e","published_at":"2023-03-29T14:30:02-04:00","created_at":"2016-07-16T22:07:03-04:00","vendor":"RallyRoad","type":"","tags":["E36","E36 M3","E46","E46 M3","Z3","Z3M","Z4M"],"price":9995,"price_min":9995,"price_max":9995,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":22021034753,"title":"5.5mm (E46 M3 only)","option1":"5.5mm (E46 M3 only)","option2":null,"option3":null,"sku":"5.5mm","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Caliper Machining Service - 5.5mm (E46 M3 only)","public_title":"5.5mm (E46 M3 only)","options":["5.5mm (E46 M3 only)"],"price":9995,"weight":9979,"compare_at_price":null,"inventory_quantity":-77,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":31446794381,"title":"12.0mm","option1":"12.0mm","option2":null,"option3":null,"sku":"12mm","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Caliper Machining Service - 12.0mm","public_title":"12.0mm","options":["12.0mm"],"price":9995,"weight":9979,"compare_at_price":null,"inventory_quantity":-2,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rallyroad.net\/cdn\/shop\/products\/machining_service_001.jpg?v=1469306942","\/\/rallyroad.net\/cdn\/shop\/products\/caliper_machining02.jpg?v=1470014568"],"featured_image":"\/\/rallyroad.net\/cdn\/shop\/products\/machining_service_001.jpg?v=1469306942","options":["Amount to Machine"],"media":[{"alt":null,"id":161516945443,"position":1,"preview_image":{"aspect_ratio":1.502,"height":666,"width":1000,"src":"\/\/rallyroad.net\/cdn\/shop\/products\/machining_service_001.jpg?v=1469306942"},"aspect_ratio":1.502,"height":666,"media_type":"image","src":"\/\/rallyroad.net\/cdn\/shop\/products\/machining_service_001.jpg?v=1469306942","width":1000},{"alt":null,"id":161516978211,"position":2,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/rallyroad.net\/cdn\/shop\/products\/caliper_machining02.jpg?v=1470014568"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/rallyroad.net\/cdn\/shop\/products\/caliper_machining02.jpg?v=1470014568","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003ePlease Note: $50 Discount on Caliper Machining Service when purchased with Front Brake Brackets. Just select the machining option on the bracket product page.\u003cbr\u003e\u003cbr\u003eWe will machine your pair of calipers to work with our custom brackets.\u003cbr\u003e\u003cbr\u003eYou must ship us your brake calipers.\u003cbr\u003e\u003cbr\u003eNormal turn-around time for this service is around 5 working days. If you need them sooner, please let us know.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote: Price shown is for machining one pair of calipers\u003c\/strong\u003e.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePlease remove pads and pins or other hardware from the calipers. This will eliminate the chance of your pads and pins\/clips becoming lost if we have to take them apart for machining.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch5\u003eWhere to Send Your Calipers\u003c\/h5\u003e\n\u003cp\u003eRally Road \u003cbr\u003e54636 Pelican Lane\u003cbr\u003eShelby Township MI 48315\u003c\/p\u003e"}
Quick View
{"id":6988303233,"title":"E36 and E46 non M3 Brackets for Porsche 996 Calipers","handle":"e36ande46nonm3bracketsforporsche996calipers","description":"\u003ch5\u003e\u003cspan\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eWe now offer brackets for non-M3 E36 and E46 cars so you can install the popular Porsche Brembo 996\/Boxster-S caliper upgrade. \u003c\/span\u003eCNC Machined Brackets are designed to fit a Porsche 996 Brembo front caliper to the E36 AND E46 non-M front spindle.\u003cbr\u003e\u003cbr\u003eTwo rotors options are available for this brake kit. The first option is the standard E46 M3 325x28mm front rotor. The standard E46 M3 rotor with fit with 17 inch wheels. Utilizing standard E46 M3 rotors requires 12mm to be machined from the mounting boss of the caliper. When you purchase brackets from us, we offer this service at a discount for additional charge (select caliper machining option and add to cart).\u003cbr\u003e\u003cbr\u003eThe 345mm diameter rotor option is for 18 inch wheels only, but requires no modification to the calipers. The E46 M3 CSL 345x28mm floating rotor is a bolt on setup for this bracket an a 996 caliper.\u003cbr\u003e\u003cbr\u003eThe studs are made from stainless steel. Calipers are secured to the bracket\/stud combo with supplied ARP 12 point nuts and washers.\u003cbr\u003e\u003cbr\u003eAlthough we are the only producers of this bracket, similar style brackets for other vehicles sell for $350 to $500 per pair.\u003cbr\u003e\u003cbr\u003eCalipers used for this conversion are Front Calipers from the 1999-2004 Porsche 996 (non-turbo), the Boxster S or the Cayman S. All these calipers are made from the same Brembo casting.\u003cbr\u003e\u003cbr\u003eThe Porsche caliper part numbers for this conversion are:\u003cbr\u003e996.351.425 (driver side)\u003cbr\u003e996.351.426 (passenger side)\u003c\/p\u003e\n\u003cp\u003eCalipers will vary in color between Porsche model and options, but the castings will be the same as will the piston sizes. A pair of calipers can regularly be found between $350 and $450. If you are having trouble finding calipers for that price, please contact us. We may just have a pair of calipers to sell within that price range or we can direct you to one of our caliper sources.\u003c\/p\u003e\n\u003cp\u003eProper pad placement with this bracket gives a full sweep of the rotor surface. No rust rings on your rotor when using this brake setup.\u003c\/p\u003e\n\u003cp\u003e*For off-road use only.\u003cbr\u003e*Please take a look at the product pictures. On non-M spindles, you will need to round off the squared portion on the outside mounting ear. This will allow clearance for the brackets to bolt up properly.\u003c\/p\u003e","published_at":"2016-07-16T22:07:00-04:00","created_at":"2016-07-16T22:07:07-04:00","vendor":"RallyRoad","type":"","tags":["Brakes","E36","E46"],"price":22495,"price_min":22495,"price_max":27495,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39296706379850,"title":"No Thanks","option1":"No Thanks","option2":null,"option3":null,"sku":"B025","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"E36 and E46 non M3 Brackets for Porsche 996 Calipers - No Thanks","public_title":"No Thanks","options":["No Thanks"],"price":22495,"weight":1361,"compare_at_price":null,"inventory_quantity":34,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":39296706412618,"title":"Yes (machine 12mm)","option1":"Yes (machine 12mm)","option2":null,"option3":null,"sku":"B025-12MM","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"E36 and E46 non M3 Brackets for Porsche 996 Calipers - Yes (machine 12mm)","public_title":"Yes (machine 12mm)","options":["Yes (machine 12mm)"],"price":27495,"weight":8618,"compare_at_price":null,"inventory_quantity":20,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rallyroad.net\/cdn\/shop\/products\/B025_02.jpg?v=1470965602","\/\/rallyroad.net\/cdn\/shop\/products\/B025_01.jpg?v=1470965602","\/\/rallyroad.net\/cdn\/shop\/products\/NONM3_01.jpg?v=1470965602","\/\/rallyroad.net\/cdn\/shop\/products\/NONM3_02_87ca3bef-a93d-4b04-9187-b8793aeebea7.jpg?v=1470965602","\/\/rallyroad.net\/cdn\/shop\/products\/NONM3_04_98299309-641a-4ebc-9caa-980587fc6466.jpg?v=1470965602","\/\/rallyroad.net\/cdn\/shop\/products\/NONM3_05_f18246e7-cdea-4d96-98ca-d408c2b0e032.jpg?v=1470965602","\/\/rallyroad.net\/cdn\/shop\/products\/NONM3_06_5156b2f7-da00-424b-930a-281dea456aad.jpg?v=1470965602","\/\/rallyroad.net\/cdn\/shop\/products\/NONM3_07_e4cd4252-dbbe-4a4f-aada-3ddc7d020f8d.jpg?v=1470965602"],"featured_image":"\/\/rallyroad.net\/cdn\/shop\/products\/B025_02.jpg?v=1470965602","options":["Caliper Machining Service"],"media":[{"alt":null,"id":161517600803,"position":1,"preview_image":{"aspect_ratio":1.499,"height":667,"width":1000,"src":"\/\/rallyroad.net\/cdn\/shop\/products\/B025_02.jpg?v=1470965602"},"aspect_ratio":1.499,"height":667,"media_type":"image","src":"\/\/rallyroad.net\/cdn\/shop\/products\/B025_02.jpg?v=1470965602","width":1000},{"alt":null,"id":161517633571,"position":2,"preview_image":{"aspect_ratio":1.499,"height":667,"width":1000,"src":"\/\/rallyroad.net\/cdn\/shop\/products\/B025_01.jpg?v=1470965602"},"aspect_ratio":1.499,"height":667,"media_type":"image","src":"\/\/rallyroad.net\/cdn\/shop\/products\/B025_01.jpg?v=1470965602","width":1000},{"alt":null,"id":161517666339,"position":3,"preview_image":{"aspect_ratio":1.25,"height":640,"width":800,"src":"\/\/rallyroad.net\/cdn\/shop\/products\/NONM3_01.jpg?v=1470965602"},"aspect_ratio":1.25,"height":640,"media_type":"image","src":"\/\/rallyroad.net\/cdn\/shop\/products\/NONM3_01.jpg?v=1470965602","width":800},{"alt":null,"id":161517699107,"position":4,"preview_image":{"aspect_ratio":1.25,"height":640,"width":800,"src":"\/\/rallyroad.net\/cdn\/shop\/products\/NONM3_02_87ca3bef-a93d-4b04-9187-b8793aeebea7.jpg?v=1470965602"},"aspect_ratio":1.25,"height":640,"media_type":"image","src":"\/\/rallyroad.net\/cdn\/shop\/products\/NONM3_02_87ca3bef-a93d-4b04-9187-b8793aeebea7.jpg?v=1470965602","width":800},{"alt":null,"id":161517731875,"position":5,"preview_image":{"aspect_ratio":1.25,"height":640,"width":800,"src":"\/\/rallyroad.net\/cdn\/shop\/products\/NONM3_04_98299309-641a-4ebc-9caa-980587fc6466.jpg?v=1470965602"},"aspect_ratio":1.25,"height":640,"media_type":"image","src":"\/\/rallyroad.net\/cdn\/shop\/products\/NONM3_04_98299309-641a-4ebc-9caa-980587fc6466.jpg?v=1470965602","width":800},{"alt":null,"id":161517764643,"position":6,"preview_image":{"aspect_ratio":1.25,"height":640,"width":800,"src":"\/\/rallyroad.net\/cdn\/shop\/products\/NONM3_05_f18246e7-cdea-4d96-98ca-d408c2b0e032.jpg?v=1470965602"},"aspect_ratio":1.25,"height":640,"media_type":"image","src":"\/\/rallyroad.net\/cdn\/shop\/products\/NONM3_05_f18246e7-cdea-4d96-98ca-d408c2b0e032.jpg?v=1470965602","width":800},{"alt":null,"id":161517797411,"position":7,"preview_image":{"aspect_ratio":1.25,"height":640,"width":800,"src":"\/\/rallyroad.net\/cdn\/shop\/products\/NONM3_06_5156b2f7-da00-424b-930a-281dea456aad.jpg?v=1470965602"},"aspect_ratio":1.25,"height":640,"media_type":"image","src":"\/\/rallyroad.net\/cdn\/shop\/products\/NONM3_06_5156b2f7-da00-424b-930a-281dea456aad.jpg?v=1470965602","width":800},{"alt":null,"id":161517830179,"position":8,"preview_image":{"aspect_ratio":1.25,"height":640,"width":800,"src":"\/\/rallyroad.net\/cdn\/shop\/products\/NONM3_07_e4cd4252-dbbe-4a4f-aada-3ddc7d020f8d.jpg?v=1470965602"},"aspect_ratio":1.25,"height":640,"media_type":"image","src":"\/\/rallyroad.net\/cdn\/shop\/products\/NONM3_07_e4cd4252-dbbe-4a4f-aada-3ddc7d020f8d.jpg?v=1470965602","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003e\u003cspan\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eWe now offer brackets for non-M3 E36 and E46 cars so you can install the popular Porsche Brembo 996\/Boxster-S caliper upgrade. \u003c\/span\u003eCNC Machined Brackets are designed to fit a Porsche 996 Brembo front caliper to the E36 AND E46 non-M front spindle.\u003cbr\u003e\u003cbr\u003eTwo rotors options are available for this brake kit. The first option is the standard E46 M3 325x28mm front rotor. The standard E46 M3 rotor with fit with 17 inch wheels. Utilizing standard E46 M3 rotors requires 12mm to be machined from the mounting boss of the caliper. When you purchase brackets from us, we offer this service at a discount for additional charge (select caliper machining option and add to cart).\u003cbr\u003e\u003cbr\u003eThe 345mm diameter rotor option is for 18 inch wheels only, but requires no modification to the calipers. The E46 M3 CSL 345x28mm floating rotor is a bolt on setup for this bracket an a 996 caliper.\u003cbr\u003e\u003cbr\u003eThe studs are made from stainless steel. Calipers are secured to the bracket\/stud combo with supplied ARP 12 point nuts and washers.\u003cbr\u003e\u003cbr\u003eAlthough we are the only producers of this bracket, similar style brackets for other vehicles sell for $350 to $500 per pair.\u003cbr\u003e\u003cbr\u003eCalipers used for this conversion are Front Calipers from the 1999-2004 Porsche 996 (non-turbo), the Boxster S or the Cayman S. All these calipers are made from the same Brembo casting.\u003cbr\u003e\u003cbr\u003eThe Porsche caliper part numbers for this conversion are:\u003cbr\u003e996.351.425 (driver side)\u003cbr\u003e996.351.426 (passenger side)\u003c\/p\u003e\n\u003cp\u003eCalipers will vary in color between Porsche model and options, but the castings will be the same as will the piston sizes. A pair of calipers can regularly be found between $350 and $450. If you are having trouble finding calipers for that price, please contact us. We may just have a pair of calipers to sell within that price range or we can direct you to one of our caliper sources.\u003c\/p\u003e\n\u003cp\u003eProper pad placement with this bracket gives a full sweep of the rotor surface. No rust rings on your rotor when using this brake setup.\u003c\/p\u003e\n\u003cp\u003e*For off-road use only.\u003cbr\u003e*Please take a look at the product pictures. On non-M spindles, you will need to round off the squared portion on the outside mounting ear. This will allow clearance for the brackets to bolt up properly.\u003c\/p\u003e"}